Technical specification - BARCHETTA CORSA |
|
Body type |
Barchetta da Corsa |
Production years |
From 1991 to 1991 |
Engine |
Rear engined V 6 cylinder @ 90° |
Bore and stroke |
82 mm / 63 mm |
Engine capacity |
1996,2 c.c. |
Compression ratio |
7,6:1 |
Maximum power |
316-bhp @ 7200 rpm |
Distribution |
Four overhead camshafts, four valves per cylinder |
Induction system |
Supercharged with two water-cooled IHI turbochargers/ two intercoolers and Weber Multi Point electonic injection |
Ignition |
Single electronic |
Lubrification |
Forced with full-flow filtering and cooler |
Transmission |
Rear wheel drive |
Differential |
Ranger® with cooler; final drive: 3,31:1 |
Clutch |
Single dry plate |
Gearbox |
ZF 6-speed transaxle |
Chassis |
Welded tubular backbone chassis. Body (constucted from a mixture of aluminium honeycomb, carbon fibre and fibreglass layers) in three sections with front and rear removable shrouds. The central tub providing seating and protection for two. |
Front suspension:- |
Wide angle double wishbones with inboard coil over shock-absorbers mounted to a magnesium subframe bolted to the front of the chassis. |
Rear suspension:- |
Wide angle double wishbones with inboard coil over shock-absorbers mounted on the transmission casing. |
Brakes |
Dual circuit non-servo brakes with balance bar and massive four-pot calipers clamping vented discs. |
Wheelbase |
2514 mm |
Wheel tracks |
Front 1610 mm Rear 1580 mm |
Wheels |
Marchesini alloys Front: 7"J x 18" / Rear: 8"J x 18" |
Tyres |
Front:- 245/40 ZR 18 Rear:- 285/35 ZR 18 |
Dry weight |
775 kg |
Maximum speed |
Over 300 km/h |
Models constructed |
According
to official figures 10 units of this model were produced. However there seems to be some doubt
about the true numbers with claims that as many as 16 cars being made. Julien Appels, the
'Barchetta Guru', has through some extensive research confirmed 13 cars so far, including one
'Barchetta' that has replaced its 2.0-litre engine with the 2.8-litre engine. |
UPDATE |
The engine in the Barchetta was a pre-Ghibli 4-valve 2.0-litre engine. This meant that it still had a distributor
and the earlier two ECU management system (Ghibli has four ECUs). This would make it on a par
with cars like the 'Racing' and the 2.24v. It was tuned to produce the extra bhp electronically
and so that it could sustain high revs was fitted with the roller bearing turbos which are only
elsewhere found in the 'Ghibli Cup'.
The gearbox was a transaxle unit which was by ZF. However, recently 'Bill McGrath - Maserati' had
had cause to strip a
Barchetta gearbox and so I've been given a little scoop! Maserati folklore suggests that the box
was a straight cut non synchromesh unit. It's not! In fact, it is a cleverly modified version of
the Audi S2 gearbox (which was originally manufactured by ZF), helical gears and synchromesh
throughout - though without the four wheel drive aspects of the S2! It is not mounted transversely
however but in line with the engine.
The chassis was a unique tubular backbone with the fuel tank (a bag tank) in the middle of the
backbone. The front suspension was mounted on a cast magnesium subframe on the front of the
chassis and was pure racing double wishbones and inboard coil over shocks. The rear suspension
was mounted on the engine and gearbox making them stressed members like a Formula One car and
again was double wishbone and inboard shocks. Over the backbone was laid a carbon fibre tub and
the composite bodywork made of a mixture of carbon fibre, aluminium honeycombe and fibreglass.
I noticed from your production figures that Sig Cozza refers to the car as a 'Pista'. All I can
say is that the brochure for the car at the time called it Corsa. I guess that the two terms are
as close in meaning in Italian as they are in English - circuit/race.
I presume from Sig Cozzas figures that you are aware that the Stradale only existed as a mock up
for the brochure and that this mock up is with Panini now.
Also, the Barchettas were made at De Tomaso and not in the Maserati factory. It is an interesting
exercise to compare the Maserati to the current De Tomaso 'Guara' as many components are shared -
including the chassis, transmission and most of the suspension. Even the wheels are made by the
same company - Marchesini. |
My sincere appreciation to Andy Heywood of Bill McGrath and Julien Appels for their invaluable help. |
|
Copyright: Enrico's Maserati Pages - © 2000. All rights reserved. |